Egor_www
Пользователь
- Сообщения
- 5
- Плагин
- geyser
- Ядро сервера
- Paper
- Версия сервера
- 1.20
- Память сервера ОЗУ
- 5Gb
помогите настроить гейзер чтобы был возможен вход без лицензии
Уже устал всем отвечать + этот вопрос на форуме задавали неоднократно
В гейзере нет, не будет и даже не планируется поддержка пиратов
Последнее редактирование:
Egor_www
Пользователь
- Сообщения
- 5
а как тогда другие популярные сервера разрешаю заходить без лицензии и с лицензии
CyberLong
Пользователь
- Сообщения
- 30
У тебя настроено хоть что-то?
В ютубе есть много гайдов, а если не понятно, то вот ещё не понятнее:
Скачиваешь GeyserMC+floodgate, перезагружаешь сервер. В GeyserMC ищешь строку 19 | port: 25565(25565 заменяешь на порт сервера), дальше ищешь строку 56 | auth-type: offline(offline заменяешь на floodgate). Так же можешь настроить файл сервер server.properties, можешь изменить online-mode: true, на false. Перезапускай сервер и готово!
В ютубе есть много гайдов, а если не понятно, то вот ещё не понятнее:
Скачиваешь GeyserMC+floodgate, перезагружаешь сервер. В GeyserMC ищешь строку 19 | port: 25565(25565 заменяешь на порт сервера), дальше ищешь строку 56 | auth-type: offline(offline заменяешь на floodgate). Так же можешь настроить файл сервер server.properties, можешь изменить online-mode: true, на false. Перезапускай сервер и готово!
Egor_www
Пользователь
- Сообщения
- 5
Разрешается выкладывание кода, файлов конфигураций, логов и т.д. только под BB-код CODE
не помогло
требует xbox
конфиг geyser
bedrock:
# The IP address that will listen for connections.
# Generally, you should only uncomment and change this if you want to limit what IPs can connect to your server.
#address: 185.9.145.217
# The port that will listen for connections
port: 25888
# Some hosting services change your Java port everytime you start the server and require the same port to be used for Bedrock.
# This option makes the Bedrock port the same as the Java port every time you start the server.
# This option is for the plugin version only.
clone-remote-port: false
# The MOTD that will be broadcasted to Minecraft: Bedrock Edition clients. This is irrelevant if "passthrough-motd" is set to true
# If either of these are empty, the respective string will default to "Geyser"
motd1: ""
motd2: ""
# The Server Name that will be sent to Minecraft: Bedrock Edition clients. This is visible in both the pause menu and the settings menu.
server-name: "§aVoltage | 1/2"
# How much to compress network traffic to the Bedrock client. The higher the number, the more CPU usage used, but
# the smaller the bandwidth used. Does not have any effect below -1 or above 9. Set to -1 to disable.
compression-level: 6
# The port to broadcast to Bedrock clients with the MOTD that they should use to connect to the server.
# DO NOT uncomment and change this unless Geyser runs on a different internal port than the one that is used to connect.
# broadcast-port: 19132
# Whether to enable PROXY protocol or not for clients. You DO NOT WANT this feature unless you run UDP reverse proxy
# in front of your Geyser instance.
enable-proxy-protocol: false
# A list of allowed PROXY protocol speaking proxy IP addresses/subnets. Only effective when "enable-proxy-protocol" is enabled, and
# should really only be used when you are not able to use a proper firewall (usually true with shared hosting providers etc.).
# Keeping this list empty means there is no IP address whitelist.
# IP addresses, subnets, and links to plain text files are supported.
#proxy-protocol-whitelisted-ips: [ "127.0.0.1", "172.18.0.0/16", "
remote:
# The IP address of the remote (Java Edition) server
# If it is "auto", for standalone version the remote address will be set to 127.0.0.1,
# for plugin versions, it is recommended to keep this as "auto" so Geyser will automatically configure address, port, and auth-type.
# Leave as "auto" if floodgate is installed.
address: auto
# The port of the remote (Java Edition) server
# For plugin versions, if address has been set to "auto", the port will also follow the server's listening port.
port: 25565
# Authentication type. Can be offline, online, or floodgate (see
# For plugin versions, it's recommended to keep the
# If Floodgate is installed and
auth-type: floodgate
# Whether to enable PROXY protocol or not while connecting to the server.
# This is useful only when:
# 1) Your server supports PROXY protocol (it probably doesn't)
# 2) You run Velocity or BungeeCord with the option enabled in the proxy's main config.
# IF YOU DON'T KNOW WHAT THIS IS, DON'T TOUCH IT!
use-proxy-protocol: false
# Forward the hostname that the Bedrock client used to connect over to the Java server
# This is designed to be used for forced hosts on proxies
forward-hostname: false
Объединено
требует xbox
Объединено
конфиг geyser
bedrock:
# The IP address that will listen for connections.
# Generally, you should only uncomment and change this if you want to limit what IPs can connect to your server.
#address: 185.9.145.217
# The port that will listen for connections
port: 25888
# Some hosting services change your Java port everytime you start the server and require the same port to be used for Bedrock.
# This option makes the Bedrock port the same as the Java port every time you start the server.
# This option is for the plugin version only.
clone-remote-port: false
# The MOTD that will be broadcasted to Minecraft: Bedrock Edition clients. This is irrelevant if "passthrough-motd" is set to true
# If either of these are empty, the respective string will default to "Geyser"
motd1: ""
motd2: ""
# The Server Name that will be sent to Minecraft: Bedrock Edition clients. This is visible in both the pause menu and the settings menu.
server-name: "§aVoltage | 1/2"
# How much to compress network traffic to the Bedrock client. The higher the number, the more CPU usage used, but
# the smaller the bandwidth used. Does not have any effect below -1 or above 9. Set to -1 to disable.
compression-level: 6
# The port to broadcast to Bedrock clients with the MOTD that they should use to connect to the server.
# DO NOT uncomment and change this unless Geyser runs on a different internal port than the one that is used to connect.
# broadcast-port: 19132
# Whether to enable PROXY protocol or not for clients. You DO NOT WANT this feature unless you run UDP reverse proxy
# in front of your Geyser instance.
enable-proxy-protocol: false
# A list of allowed PROXY protocol speaking proxy IP addresses/subnets. Only effective when "enable-proxy-protocol" is enabled, and
# should really only be used when you are not able to use a proper firewall (usually true with shared hosting providers etc.).
# Keeping this list empty means there is no IP address whitelist.
# IP addresses, subnets, and links to plain text files are supported.
#proxy-protocol-whitelisted-ips: [ "127.0.0.1", "172.18.0.0/16", "
Авторизуйтесь для просмотра ссылок.
" ]remote:
# The IP address of the remote (Java Edition) server
# If it is "auto", for standalone version the remote address will be set to 127.0.0.1,
# for plugin versions, it is recommended to keep this as "auto" so Geyser will automatically configure address, port, and auth-type.
# Leave as "auto" if floodgate is installed.
address: auto
# The port of the remote (Java Edition) server
# For plugin versions, if address has been set to "auto", the port will also follow the server's listening port.
port: 25565
# Authentication type. Can be offline, online, or floodgate (see
Авторизуйтесь для просмотра ссылок.
).# For plugin versions, it's recommended to keep the
address field to "auto" so Floodgate support is automatically configured.# If Floodgate is installed and
address: is set to "auto", then "auth-type: floodgate" will automatically be used.auth-type: floodgate
# Whether to enable PROXY protocol or not while connecting to the server.
# This is useful only when:
# 1) Your server supports PROXY protocol (it probably doesn't)
# 2) You run Velocity or BungeeCord with the option enabled in the proxy's main config.
# IF YOU DON'T KNOW WHAT THIS IS, DON'T TOUCH IT!
use-proxy-protocol: false
# Forward the hostname that the Bedrock client used to connect over to the Java server
# This is designed to be used for forced hosts on proxies
forward-hostname: false
Последнее редактирование: